FREE DSTV

HOW TO SET UP SUPREME MASTER AND START WATCH STATIONS FOR FREE



Supreme Master TV is FREE on DSTV Decoders NO DSTV contract required!
If ever Supreme Master TV goes offline just “reset” decoder to factory defaults from “advanced options” menu as explained bellow and re-do settings then Supreme Master TV will be back in PUBLIC Bouquet. Thank you!

Dear viewers, SUPREME MASTER TELEVISION is broadcast all around the world. It is available in South Africa on DSTV, on the free to air public bouquet.
To view SUPREME MASTER TELEVISION you will need to set your decoder so that it also receives our free channel.
For decoder type 1110
• Turn on your TV and your decoder
• On your decoder remote press the menu button. A list will appear on the screen
• From that list select “advanced options” and press OK. (select by using up and down arrows)
• Then select “dish installation” and press OK
• Enter the pin 9949
• Scroll down to “network 2” do not press OK yet. Press the right arrow button key until the word “other” appears. Then press OK
• Now scroll down to “frequency” and press OK. Then press left arrow button until frequency is blank, then type in 12562. Press OK
• Similarly change symbol rate to 26657 . Press OK
• For FEC select ½ by using left arrow
• Set polarization to horizontal
• Select “accept displayed values and leave screen”
• Now select “scan all networks” and press OK
Well done!
Now your decoder will scan. This will take a few moments…
Congratulations! Your decoder is now setup to also view free to air channels
To view SUPREME MASTER TELEVISION you can now press the TV button on your decoder remote and select “Public PAS 7/10
Now press the right arrow
A list of channels will appear. (use up, down, left, right arrows to move around and select). Select “SUPRE”. Press OK
You are now watching SUPREME MASTER TELEVISION. Congratulations!
To return to DSTV Bouquet simply press the TV button and select DSTV.


Multichoice DSD 660 & 910 and 990 and newer
See futher down for Tuning details for Multichoice older single view and Duelview decoders

In second network setup "other” network
on DSD 660 and DSD 910 and 990 and 1110
Optional “Can reset decoder to factory defaults” before adding new FREE channels
Settings for Supreme Master TV
Pas 7/10
Frequency 12562
Symbol Rate 26657
FEC ½
Pol = Horizontal
Free DSTV decoder settings for Supreme Master TV
Press menu on the Remote
Advanced options OK
Dish Installation OK
9949
Go to Network 2 setup then press right arrow button until you see the work “other”
DO NOT PRESS OK
Scroll down to Scann All Network OK OK
Go to “other” in Network 2 setup
Press menu on the Remote
Advanced options OK
Dish Installation OK
9949
Go to Network 2 setup then press right arrow button until you see the work “other”
Add our settings
Frequency 12562
Symbol Rate 26657
FEC ½
Pol = Horisontal
Scroll down to Scann All Network OK OK
When done scanning
Press TV botton on the remote
Select Public PAS 7/10n (bouquet)
Supreme Master TV is usually on Channel 21 or 22


Duel view decoder
Decoder remote => press menu
Go to advanced options –
Go to Dish install OK 9949
9949 new window Home Network
Go to network 2
Scroll on till you get PAS 7
OK
Then it takes you to a new frame
With left arrow change frequency to 11170 press OK
Symbol rate 26652 OK
Fec 5/6 OK
Polarization = Vertical OK
NIT = Yes
Then Go to Network 3
And do same as above with different settings
With left arrow change frequency to 12562 press OK
Symbol rate 26657 OK
Fec 1/2 OK
Polarization = Horizontal OK
NIT = Yes
Accept these setting OK
Network 1+2+3 say PAS 7
Scan all networks


Tuning details for Multichoice old single view

On your REMOTE CONTROL Press the MENU button
Press 6 or 7 for ADVANCED OPTIONS and press OK
Press 1 for DISH INSTALLATIONS
Enter PIN code: 9949
Press 1 for LNB CONFIGURATION and press OK
Press 2 for LNB CONFIGURATION and Press OK
Press 1 for LNB. It should be “DISABLED”.Press OK
Press the left arrow button once, “DISABLED” should now change to “ENABLED” Press OK
Go to option 7, ACCEPT THESE SETTINGS and press OK
Press EXIT once
Press 2 for NETWORK CONFIGURATION and Press OK
Press 2 for NETWORK 2 SETUP and press OK (if 2 is grayed out, use NETWORK # SETUP)
On SIGNAL SETUP press the OK to highlight DISABLED
Press ‘Right arrow’ (>) to change ENABLED and press OK
Make sure #2 ORBITAL POSITION is PAS7/10
Make sure #3 USE NIT is YES
Press 4 for Frequency you may need to press OK before the next step)
Press Left arrow button (<) 5 times
Enter 12562 and press OK to save
Press 5 for SYMBOL RATEL you may need to press OK before the next step)
Press the left arrow button (<) 5 times
Enter 26657 & OK to save
Make sure #6 Polarization is HORIZONTAL
Press 7 for FEC (you may need to press OK before the next step)
Press left arrow button (<) 3 times until is reads 1/2
Press OK button to save
Press 8 to VIEW SIGNAL STRENGHT then press OK button to save
When saved press EXIT once only
Press 4 to SCAN ALL NETWORKS and press OK
After scanning process is complete, receiver may go to channel 101 or to another DSTV channel
Go to channel 101 which should be MNET
TO WHATCH SUPREME MASTER TELEVISION
On your remote control, press TV button
Press the Up arrow button on your remote
Find and select PUBLIC PAS 7/10 and press OK
Press the P+ button on your remote until you find SMTV
For DSTV, press the TV button on you remote and select DSTV

http://www.suprememastertv.com/bbs/board.php?bo_table=satellite
Satellite/Orbital Position:
INTELSAT 10 (Ku Band) at 68.5º E
Transponder 17
Frequency: 12562H
Symbol Rate: 26657
FEC: 1/2



INTELSAT 10 (C Band) at 68.5º E
Transponder: G14C
Frequency: 3808V
Symbol Rate: 10340
FEC: 3/4
Program: 2
PMT: 502
PCR: 102
Video: 102
Audio: 202
082 570 4437

HOW DO I FIND Supreme Master TV?
How to Tune to Supreme Master TV DSTV Settings

1. Press Menu Button
2. Move down to “advanced option” press OK
3. On dish installation press OK
4. Enter Pin Code 9949
5. On dish installation press OK
6. Move down to Network configuration press OK
7. Move down to Network 2 setup and press OK
Check if the signal setup is enabled/disabled,
If it is enabled pres Exit and move to the next network.
The one which is “disabled” press OK and then change
to enable by using the right arrow-and then press OK

° Signal Setup-ENABLED
° Orbital position-PAS7/10
° Use NIT-Yes
° Frequency-12562
° Symbol rate-26657
° Polarization-HORIRONTAL
° FEC-1/2
° Then Press OK
° Move down to ACCEPT THESE SETTINGS and
then press OK
° Press Exit to return to dish menu
° Move to SCAN NEW NETWORK then press OK
(if not available) press scan all net works then press OK.
° It will take 3-5 minutes
° Wait for a new screen to display
° Press TV button and move down to Public PAS7/10 and then press OK